360 Cooler Kits
Ferrari 360 HEXDL Transmission Cooler Kit – Heat Exchanger Delete
Ferrari 360 HEXDL Transmission Cooler Kit – Heat Exchanger Delete
Couldn't load pickup availability
Ferrari 360 HEXDL Transmission Cooler Kit
Complete Factory Heat Exchanger Replacement System
Engineered for Reliability, Performance & Independent Thermal Control
NOW IN PRODUCTION — ESTIMATED LEAD TIME: 3–4 WEEKS
The DeCuzzi Motorsports (DMS) HEXDL Transmission Cooler Kit is a complete, purpose-built external transmission cooling system designed specifically for the Ferrari 360 Modena and Spider.
Our system replaces the original oil-to-water transmission heat exchanger with a dedicated Setrab stacked-plate cooler and thermally controlled SPAL electric fan, separating transmission cooling from the engine's coolant circuit.
Developed through more than two years of extensive testing and over 20,000 combined miles of real-world operation, HEXDL was engineered to address the limitations and potential failure risks associated with the original factory design.
Most importantly, HEXDL completely eliminates the factory heat exchanger's internal coolant-to-transmission-fluid cross-contamination failure pathway.
What's Included — Complete HEXDL System
Each kit includes the components required for our purpose-built cooling arrangement:
-
Premium Setrab Stacked-Plate Transmission Cooler — High-efficiency external cooling unit designed to dissipate transmission heat directly to surrounding air.
-
SPAL Electric Cooling Fan — Provides additional airflow when activated, including during low-speed operation.
-
Thermal Activation Switch — Controls fan activation in response to temperature.
-
Electrical Components — Fan relay, fuse, fuse holder, and manufacturer-provided connection instructions.
-
Proprietary HEXDL Mounting System (Patent Pending) — Precision-formed from marine-grade 5052 aluminum for a secure, purpose-built installation.
-
PTFE 919 Fluid Lines — High-quality transmission fluid lines with performance-grade fittings.
-
OEM Sealing Components — Required factory-style seals and associated components.
-
Factory OEM B-Pillar Clips — Included for proper installation and retention of applicable components.
-
Custom Aluminum Exhaust Heat Shields — Precision-formed replacements for both lower factory fiberglass heat shields.
-
Mounting Hardware — Components required to secure the HEXDL system.
-
Installation Documentation — Supporting instructions, including Setrab electrical and thermal-switch documentation.
The complete kit replaces the original heat exchanger assembly and associated factory fluid delivery and return tubes.
Key Advantages
-
Independent transmission cooling, separate from engine coolant
-
Complete elimination of the factory heat exchanger's internal cross-contamination pathway
-
Lower, more consistent external transmission fluid-line temperatures observed during our testing
-
Dedicated airflow from a thermally activated SPAL fan
-
Purpose-built components designed specifically for Ferrari 360 applications
-
Replacement aluminum lower exhaust heat shields
-
Removable system designed to permit reinstallation of the original cooling arrangement
-
More than 20,000 combined miles of real-world operation across our HEXDL-equipped vehicles
Why Independent Transmission Cooling Matters
Whether driving through city traffic, enjoying a weekend cruise, or participating in a track event, proper transmission temperature management is essential to the continued performance and reliability of your Ferrari.
The factory Ferrari 360 transmission cooling arrangement uses an oil-to-water heat exchanger connected directly to the engine cooling system.
With engine coolant temperatures reaching approximately 190–210°F under certain operating conditions, the original exchanger may actually transfer heat into the transmission fluid whenever the coolant is hotter than the fluid.
When the transmission fluid becomes hotter than the engine coolant, the exchanger can remove heat. However, the effectiveness of this process depends partly on the temperature difference between the two fluids.
This creates a fundamental limitation: the original transmission cooling arrangement is directly influenced by engine coolant temperature.
The HEXDL system eliminates that dependency by replacing the factory exchanger with a dedicated air-to-oil cooling arrangement.
Transmission heat is transferred directly to surrounding air through the Setrab cooler, with additional airflow supplied by the SPAL fan when activated.
This approach provides a separate heat-rejection path while permanently removing the original exchanger's internal coolant-to-fluid contamination failure point.
Why We Developed HEXDL
DeCuzzi Motorsports was built on decades of hands-on experience in racing, performance development, restoration, and mechanical engineering.
Robert and Anthony DeCuzzi have spent much of their lives working with performance vehicles, developing solutions, and learning through practical experience.
Our philosophy has always been simple: study the problem, understand the limitations, and engineer a solution designed to exceed expectations.
During our years of Ferrari 360 ownership and maintenance, we became increasingly concerned about the original transmission heat exchanger design.
Several friends experienced significant transmission damage and costly repairs associated with failures of the original cooling arrangement.
We also encountered contamination concerns during maintenance of our own Ferrari 360 vehicles.
The more we studied the system, the more we questioned whether simply replacing the original exchanger with another factory unit was the best long-term solution.
We wanted to address both the potential for fluid cross-contamination and the relationship between transmission cooling and engine coolant temperature.
Rather than redesigning the original exchanger, we decided to eliminate it entirely.
Anthony and Robert developed the HEXDL system around a dedicated external Setrab cooler, thermally controlled SPAL fan, custom mounting system, carefully routed fluid lines, and purpose-built aluminum components.
Our initial prototype was installed on Anthony's Nero Ferrari 360 Modena, where it underwent extensive real-world testing and refinement.
The completed system was subsequently installed on our second Ferrari 360.
HEXDL wasn't developed simply to create another performance accessory. It was developed to address a problem we had experienced and witnessed firsthand.
Real-World Testing & Performance
Over more than two years of development and testing, we monitored external transmission fluid-line temperatures using thermal and infrared measurements across our Ferrari 360 vehicles.
Our research included everyday driving, traffic, highway operation, warm-weather conditions, and spirited driving.
Grigio Ferrari 360 — Factory Cooling System
Our Grigio Ferrari 360 served as the baseline for evaluating the original transmission cooling system.
The vehicle was equipped with an updated 2018 factory heat exchanger, installed in 2019 during previous maintenance. It had accumulated several thousand miles without noticeable transmission problems before our development process began.
During continued monitoring, we regularly recorded external transmission fluid-line temperatures ranging from 190°F to as high as 215°F, with frequent fluctuations under changing driving conditions.
Over time, we also experienced increasingly noticeable transmission behavior, including harsh or clunky shifts, delayed engagement, and inconsistent shifting performance.
After approximately 12,000 miles of operation, continued temperature fluctuations and the discovery of deteriorated, burnt transmission fluid during servicing raised serious concerns about the long-term condition and reliability of the factory arrangement.
Combined with our previous contamination concerns and the experiences of fellow Ferrari owners, these observations led us to discontinue use of the factory exchanger and install our independently developed system.
Nero Ferrari 360 Modena — DMS HEXDL Cooling System
By comparison, Anthony's Nero Ferrari 360 Modena, equipped with our independent HEXDL cooling system, demonstrated noticeably lower and more consistent external transmission fluid-line temperature readings.
Across extensive testing in varied driving conditions, we consistently observed temperatures of approximately 160–175°F, remaining below 180°F during monitored operation.
Throughout this testing, Anthony reported smooth, predictable transmission operation without noticeable harsh shifting, clunking, engagement delays, or slipping.
During routine servicing, we also observed that the transmission fluid appeared cleaner and in better condition than the deteriorated fluid previously encountered in our factory-equipped Grigio Ferrari 360.
What Our Testing Demonstrated
Our observations included:
-
Lower temperature readings: Generally 20–30°F lower external transmission fluid-line readings during the driving conditions we compared.
-
Improved temperature consistency: Fewer pronounced temperature fluctuations in our monitored observations.
-
Smooth transmission operation: No noticeable harsh shifting, engagement delays, clunking, or slipping reported during Anthony's testing.
-
Cleaner-appearing transmission fluid: Favorable visual observations during routine maintenance.
-
Independent heat rejection: Transmission cooling without reliance on the engine's coolant circuit.
These observations represent measurements and operating experiences from our own vehicles rather than controlled laboratory testing.
Temperature figures are external fluid-line measurements, not direct internal gearbox fluid temperatures. Results may vary depending on driving conditions, vehicle configuration, installation, and maintenance.
More Than 20,000 Combined Miles
Our HEXDL-equipped Ferrari 360 systems have accumulated more than 20,000 combined miles of real-world operation without recurrence of the contamination issues that originally motivated the project.
For us, this extended operating history has been an important part of validating our approach and refining the complete system.
Eliminating the Factory Cross-Contamination Failure Point
One of the most important benefits of HEXDL is the complete removal of the original oil-to-water transmission heat exchanger.
In the factory arrangement, engine coolant and transmission fluid circulate through separate internal passages within a common component.
If an internal barrier fails, coolant and transmission fluid can mix, potentially compromising lubrication, contaminating the engine cooling system, and contributing to costly mechanical damage.
HEXDL eliminates this specific failure pathway completely.
Because the original exchanger is removed, engine coolant and transmission fluid no longer share that component.
The result is a dedicated external transmission cooling arrangement without the factory exchanger's internal coolant-to-fluid interface.
Rather than merely attempting to reduce the likelihood of an internal exchanger failure, our system removes that particular failure point altogether.
Vehicle Compatibility
Designed for:
-
Ferrari 360 Modena — F1 Transmission
-
Ferrari 360 Modena — 6-Speed Manual
-
Ferrari 360 Spider — F1 Transmission
-
Ferrari 360 Spider — 6-Speed Manual
OEM Reference Components
The HEXDL system replaces or integrates with several original Ferrari components, including:
-
Fluid delivery tube — 173686
-
Fluid return tube — 173687
-
LH exhaust heat shields — 176374, 196340
-
RH exhaust heat shields — 176286, 196339
-
Water pump O-ring — 137868
-
Thermostat gasket — 137873
-
Additional O-ring — 149279
-
Factory OEM B-pillar clips — included
Part numbers are provided for reference. Variations may exist depending on model year and vehicle configuration.
Installation & Vehicle Variations
The HEXDL system is designed for a clean installation using existing Ferrari mounting locations wherever possible.
Due to minor variations between Ferrari 360 vehicles, some installations may require drilling one small hole at the designated mounting location to secure a mounting plate bolt.
The system is designed to be removable, permitting the factory cooling arrangement to be reinstalled if desired. Any additional mounting hole would remain unless separately repaired.
Professional installation is recommended.
Proper fluid routing, secure mounting, electrical connections, fluid filling and bleeding, and verification of adequate clearances are essential.
Production & Availability
NOW IN PRODUCTION — AVAILABLE TO ORDER
Estimated lead time: 3–4 weeks
Each HEXDL system is carefully assembled and checked for quality, fitment, and component completeness before shipment.
The stated lead time is an estimate from order placement to shipment preparation and does not include carrier transit time.
Domestic and international shipping options are available for supported destinations.
We appreciate the continued interest in this system and the opportunity to share our development with fellow Ferrari enthusiasts.
Installation & Use Notice
This product is intended for off-road and performance use. Professional installation is recommended.
The purchaser and installer are responsible for confirming vehicle compatibility, proper installation, secure mounting, correct fluid routing, electrical operation, adequate clearances, and system functionality prior to vehicle operation.
Improper installation or use may cause vehicle damage, mechanical failure, or injury. Modifications may affect vehicle operation, reliability, and applicable road-use requirements.
DeCuzzi Motorsports
Engineered from Experience. Built with Purpose.
Developed by Ferrari Owners. Tested in the Real World. Designed to Eliminate the Factory Heat Exchanger Failure Pathway.
Share
